From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
In this lesson we are going to talk about data acquisition using the basic DAQmx functions.
We will first talk about how to setup channels and tasks in the Measurement and Automation Explorer(MAX). MAX, is the tool we use to configure our devices with LabVIEW. It allows us to setup a data acquisition task which combines the information necessary to run a data acquisition process. Finally we will finish off with how to use our task in LabVIEW.
Lesson Video 1
Lesson Video 2
Lesson Video 3
Practice Problem
Procedure: Create the required VI(s) to achieve the following tasks.
Requirements:
Create a data acquistion task which reads data from the audio input on your MyDAQ using the DAQmx functions