Re: Can I use LVDS (in and out) from those banks which is powered from 3.3V?

Table 12 in the sbRIO-9651 user manual lists the IO standards and appropriate nominal supply voltages.  The LVDS standards in the table require 2.5V.

Table 15 specifies the common mode input and output voltages for LVDS pairs - min, max, and typical.

http://www.ni.com/pdf/manuals/376962b.pdf

The sbRIO CLIP generator (used to configure the capabilities of all IO on the SOM) has rule checking in place to ensure your IO configuration is valid before generating a CLIP.

Spex

Spex
National Instruments

To the pessimist, the glass is half empty; to the optimist, the glass is half full; to the engineer, the glass is twice as big as it needs to be has a 2x safety factor...
(8,559 Views)