Hello,
I am using the NI PXI/PCI-1428 board. I am sending a camera link video (coming from an FPGA) to the frame grabber. I have been trying to create a custom camera with the camera file gener...
... View more
I have working visual studio 6 c++ code that works with our custom 3d camera over camera link. We have a customer that has specified a pxi system using the pxi-1428 frame grabber. My code currently...
... View more
Hi, guys. I got a problem about my camera A102k from Basler company. I want to grab the picture from the camera by NI device, the NI device type is NI PXI-1033 and the board type is NI PXI-1428. Ever...
... View more
Hi, guys. I got a problem about my camera A102k from Basler company. I want to grab the picture from the camera by NI device, the NI device type is NI PXI-1033 and the board type is NI PXI-1428. Ever...
... View more
Hi
I have a PXI-1428 frame grabber and a Basler acA2040-180km. I can get the camera and frame grabber to work together when configured for 1X2-1Y, 8-bit operation. But, I need 12 bit, 2-tap operati...
... View more
Hello all,
I am currently working on a project that requires the capture of a image from a wall and for it to be processed in matlab. I have a IMAQ PCI - 1428 device installed on my pc with a ...
... View more
Hi folks,
I have a question concerning the serial communication with a NI PXI 1428 Framegrabber Card.
We are building a LVDS-adapter that will be connected to the NI PXI 1428 Card. The Commun...
... View more
Greetings Wireworkers,
I have developed an RT application using a PXI-1428 (cameralink) board and a Basler L101k-2k camera. The application scans items passing on a conveyor belt, and photocell...
... View more
I would like to route a signal that would come into y(3)-, y(3)+ (pins 17,16) of the pxi-1428 68 pin connector to come out of TTl_Trig (1) (pin 7). This is supposdely the CL Spare signal from the cam...
... View more
There are some LVDS lines on the MDR 26-pin connector labeled CC(1-4) for which I would like to know if these lines can be controlled programatically through LabView driver commands?
... View more
