Wireless Sensor Networks

cancel
Showing results for 
Search instead for 
Did you mean: 

ni wsn/labview

 

Hello

For my project i have to figure out how to establish the communication between node 1 and node 2 without the use of the gateway as an intermediate (3 or less hops).
Can you please tell me how to wire the components in the figure below ?
Thank you !

0 Kudos
Message 1 of 7
(3,821 Views)
WSN signal routing is abstracted away from the user. Built on the ZigBee protocol, the WSN network provides message hopping and adaptable routing.
 
For a LabVIEW example using WSN nodes, you can navigate to the following folder: Help >> Find Examples... >> Hardware Input and Output >> NI-WSN. In this Example Finder folder, you can find many examples of WSN applications and how code for these applications is designed. 
0 Kudos
Message 2 of 7
(3,809 Views)

thanks for helping Smiley Happy
the problem i had at first was configuring an end node to be a router node, now the problem is solved, i did it using NI MAX 

0 Kudos
Message 3 of 7
(3,782 Views)

i need to know how to pass from "capture2" to "capture1" i know that it can be done using "shared variable node", but when i use this option i ge t "capture3" not "capture1" !! any help please!

0 Kudos
Message 4 of 7
(3,776 Views)

Could you please clarify your question? Are you trying to pass data from one node to another?

0 Kudos
Message 5 of 7
(3,747 Views)
Highlighted

exactly,I passed from the star network topology to the multi-hop network topology, the point is to send data from the end node  to the router node, and from this router node to the gateway, and to do so i need to use the shared variable in labview code so that the data collected from the thermocouple in the end node can be available all through the network.

I hope it s clear enough Smiley Happy

0 Kudos
Message 6 of 7
(3,740 Views)

exactly,I passed from the star network topology to the multi-hop network topology, the point is to send data from the end node  to the router node, and from this router node to the gateway, and to do so i need to use the shared variable in labview code so that the data collected from the thermocouple in the end node can be available all through the network.

I hope it s clear enough Smiley Happy

0 Kudos
Message 7 of 7
(3,740 Views)