Wireless Sensor Networks

cancel
Showing results for 
Search instead for 
Did you mean: 

Undeploy a .vi from WSN node

Highlighted

Hello all,

 

how can I undeploy a .vi file from a WSN node that I don't need anymore?

 

I have tried undeploy but it didn't work. Still in the WSN configuration the node appears with a .vi deployed on it.

 

Thank you in advance!

 

Regards,

 

Kostas

0 Kudos
Message 1 of 3
(3,915 Views)

You can clear the VI on the node by holding down its reset button ~10 seconds. This will cause the node to factory reset with no VI on the node. You will know if it worked if the node's signal strength LEDs begin flashing Outside LEDs<---->Inside LEDS. 

 

The Undeploy option in the LabVIEW project undeploys I/OVs that may not be used anymore. It does not undeploy the VI as you have discovered. 

 

Cheers,

Brian A

R & D Product Support Engineer | WSN/Network DAQ/Wireless

National Instruments

0 Kudos
Message 2 of 3
(3,914 Views)

Also, if you do not have a physical access to your node, you can "upgrade" the firmware with the default one via the web interface or the monitor.

 

Matt

 

 

0 Kudos
Message 3 of 3
(3,897 Views)