Wireless Sensor Networks

cancel
Showing results for 
Search instead for 
Did you mean: 

NI-9792 deploy and remove ethernet

Hello everyone,

 

I want to use a NI-9792 to collect data. However, I want it to collect it for days and I cannot afford having a PC nearby. The steps I need to followe are:

 

1. Deploy the project so that it starts collecting the data.

 

2. Disconnect from the project explorer

 

3. Remove ethernet cable

 

If there is anything more, please let me know!

 

Thank you all again!

0 Kudos
Message 1 of 4
(4,202 Views)

You have to build an application and then run it at startup. You will be asked to reboot your gateway.
I'm pretty sure you have to have a special licence to do so.
My projects are running since years, away from my PC...

 

Good luck

Have a nice day

 

Matt

0 Kudos
Message 2 of 4
(4,198 Views)

However will the procedure I described above work?

 

Thanks

0 Kudos
Message 3 of 4
(4,189 Views)

Well, I think that for collecting data You need to deploy the VI on Your Programmable Gateway (NI 9792) and let the VI Run continuously on the Gateway. But make sure you have to connect the ethernet cable if the IP Adress is assigned to the Gateway.

 

0 Kudos
Message 4 of 4
(4,178 Views)