Wireless Sensor Networks

cancel
Showing results for 
Search instead for 
Did you mean: 

Flash 9792 with image

I have several 9792 units that I have to configure. This includes loading the NI realtime software and loading some custom software. It is a long process the way I was tought to do this by the person who originally was over the project. We have several of these 9792 gateways and the only difference among them is their configured name and assigned IP address. I wanted to know if I can make an 'image' of sorts of one of the gateways I have already configured and simply flash it to the other gateways as needed. This would save me a lot of time.

0 Kudos
Message 1 of 2
(2,243 Views)

You could potentially use the RAD utility but I'm not sure if it only works with cRIOs, so you might want to look into that.

 

RAD Utility

http://www.ni.com/example/30986/en/ 

 

Additionally, here is a KB on imaging WSN Nodes, which you may find helpful:

 

How do I programmatically deploy a WSN application image to multiple WSN nodes?

http://digital.ni.com/public.nsf/allkb/0795DCA8B1ECDF2886257A69005B30FD?OpenDocument

0 Kudos
Message 2 of 2
(2,223 Views)