From 04:00 PM CDT – 08:00 PM CDT (09:00 PM UTC – 01:00 AM UTC) Tuesday, April 16, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Home Community Discussion Forums Additional NI Product Boards VXI and VME Topic

VXI and VME

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

I Require an Example for Message based communication in VXI using LabVIEW

I Require an Example for Message based communication in VXI using LabVIEW

‎03-04-2005 08:28 AM

I'm trying to use Tektronix/CDS 73A-453 for sending data to a remote terminal through MIL-STD 1553b. Please give some examples in this, as I am unable to start the project without knowing these basics. Thank You.
0 Kudos
Message 1 of 2
(6,423 Views)
Reply

Re: I Require an Example for Message based communication in VXI using LabVIEW

‎03-07-2005 09:55 AM

Hi,

If you are using LabVIEW or LabWindows/CVI you can find a driver for this instrument at this website. Select Tektronix/CDS as the manufacturer and enter 73A-453 in the Additional Keywords and hit go. This will bring up the two drivers. When you install this on your computer put it in the following directory:
C:\Program Files\National Instruments\LabVIEW 7.1\instr.lib

If you place it here the functions will show up in LabVIEW if you go to the Block Diagram's Functions Palette>>Instrument I/O>>Instrument Drivers. This should get you started. If you have more questions please repost.

JenK
0 Kudos
Message 2 of 2
(6,412 Views)
Reply