VXI and VME

cancel
Showing results for 
Search instead for 
Did you mean: 

E1383A VXLink Kit + E1326B multimeter

This question is about HP hardware, but I think that it makes sense asking here since there maybe some NI software available as a solution.

 

I have an old system composed by an HP E1383A VXI ISA Card Interface (witch I have no drivers for them, and can't find anywhere, for any operating system) and an HP E1326B Multimeter on the same system that I can't have access to it.

 

I was able, however, to establish some sort of connection with bits and pieces of a program named EPConnect from Radisys (dated 1994) on Windows 98, but it seems that this program and drivers are for Windows 3.11 and I can't see the board any where on the device manager of Windows 98.

 

I also have found drivers for the multimeter board (HP E1326B) on:

 

http://www.home.agilent.com/agilent/techSupport.jspx?pid=1000002431%3Aepsg%3Apro&pageMode=DS&cc=US&l...

 

but, if I can't get access to the ISA Board (HP E1383A), how can I have access to the multimeter functions?

 

Is there any way that I can resolve this problem?  On any operating system?  How can I have access to the ISA board and the multimeter?

 

As a last technical detail, I have found that I can communicate with the ISA board through:

 

ISA Card I/O: 0x4230

VXI Module Port Address Base: 0x8230

IRQ = 10

 

Using the Radisys software (I can see that the board is really there).

 

Any help would be very appreciated, and thank you in advance for reading,

Eng. Marco Ferra

0 Kudos
Message 1 of 4
(7,575 Views)
Hello Marco,
 
This is a big one!
 
Well, what can be done on our side is to provide you with a PCI-VXI or USB-VXI solution because ISA isn't on our catalog no more. This would allow you to control your VXI easily. I wish I could help you more, but there's no solution for your system. It is too hold!
 
By the way, thanks for posting here your questions (even on non-NI products :D)
 
You can call us and ask for direct assistance or advises if you wants to go forward.
 
Best regards,
BRAUD Jean-Philippe
Field Sales Engineer - Nord et Centre France
LabVIEW Certified Developper
0 Kudos
Message 2 of 4
(7,563 Views)
Oh I see. It's an old system indeed...

Can you recommend a PCI-VXI (not USB) solution to this application?
0 Kudos
Message 3 of 4
(7,556 Views)
Hello,
 
In order to connect a computer to a VXI system, we can provide you with MXI-2 or MXI-3 solutions. Please follow this links to learn more about this "starter kit". Of course, you can purchase parts of this system only. 
 
Best regards,
BRAUD Jean-Philippe
Field Sales Engineer - Nord et Centre France
LabVIEW Certified Developper
0 Kudos
Message 4 of 4
(7,552 Views)