Does anybody have some hints on how to plug in to SwitchExecutive to integrate an own (non-NI based) switching device? In my case, I am thinking about integrating a pneumatic switching matrix with 72 valves...
If it is possble at all....
Solved! Go to Solution.
I never tried that but I've read that with IVI Switch driver you should be able to accomplish this (or at least that what I understand). So, you need custom IVI Switch Driver.
Adding to Michal's links, I have managed to use it with pickering devices. You need to make it IVI compaitble.
thanks for the information, it'a a good starting point! The only thing, which bothers me a bit is that I was not yet able to find a .net template for a IVI switch driver. CVI is not part of our regular toolchain, so I am a bit reluctant.
I shall keep on searching. As of now, we're evaluating the feasibilty of this concept in general.
Using IVI Drivers with LabView
Writing IVI driver with LabWindows/CVI
Seems that LabWindows is first choice...
I'm not the expert but look for ".NET IviSwtch"
There is .NET IVI as well.