Unrecoverable RoboRio with Unknown Firmware Version

[Programmer_Matt]

Hello from team 5006,

Recently RoboRio's firmware was being updated and the power was cut to it. I have gone through the steps listed in the following error.

When I put the RoboRio in safe mode I get continuous blinking rather than the expected 3 blinks. My problem is nearly identical to the RoboRio's Condition in the forum post here (https://forums.ni.com/t5/Real-Time-Measurement-and/Unable-to-flash-a-roborio-Error-2147220335-occurr...)
Hopefully, the RoboRio can be fixed with ease. Thanks for the support.

Matt from Team 5006

[mshafer]

Hi Matt,

Thanks for posting. Is this the original roboRIO, or a roboRIO 2?

Unfortunately, power loss during firmware upgrade probably left the rio in an "unknown" state (meaning, the rio won't know how to boot etc.); however, we have some options to recover it (and which step is next depends on the version of the rio).

[Programmer_Matt]

Thanks for responding.
It is the original roboRio.

[mshafer]

Since you haven't enabled direct messages, I sent an email to the email listed on your profile with instructions for using a USB file to re-flash the roboRIO. Please let me know if this works for you.