The Daily CLAD

Community Browser
cancel
Showing results for 
Search instead for 
Did you mean: 
1266 Views
5 Comments

Which of the Timed Loop Nodes identified can be used when the loop is iterating to configure the Timed Loop settings for future iterations of the loop?

Timed Loop Right Data Node.png

1398 Views
8 Comments

Identify the terminals of the Timed Loop Input Node?

Timed Loop Items.png

a) 1 = Source Name, 2 = Period, 3 = Priority, 4 = Processor

b) 1 = Frequency, 2 = Period, 3 = Priority, 4 = Processor

c) 1 = Source Name, 2 = Period, 3 = Precedence, 4 = Processor

d) 1 = Frequency, 2 = Period, 3 = Priority, 4 = FPGA

1844 Views
9 Comments

Consider the VI below.  What is the type of the Boolean to (0,1) numeric output?

NOTE:  Steve has removed the data type shown by LabVIEW through the power of GIMP .

Boolean to (0,1).png

a) U8

b) I8

c) U16

d) I16

1660 Views
11 Comments

Given the ASCII Table, what is String Out following execution of the VI?

NOTE:  The ASCII Table is shown for refernece, no changes have been made to the standard ASCII Table.

ASCII Table.PNG

String to Byte Array.png

String to Byte Array Answers.png

1557 Views
10 Comments

What are the contents of Error Array Out following execution of the VI?

Clear Error.png

Clear Error Answers.png

1548 Views
9 Comments

If the following VI is saved and then run twice, what are the contents of Numeric Array Out following execution?

Pipelining 2.png

Pipelining 2 Answers.png

1986 Views
13 Comments

Consider the Venn Diagram below.  It has been combined with LabVIEW (empty U8 arrays have been added) to allow you to programmatically fill each segment with data.

 

 Coding+Challenge+#2+-+Multiples+Venn+Diagram.png

 

 

 

Write an application that sorts the data generated by the following VI into the appropriate segments (arrays) within the Venn Diagram.

 

 

Coding+Challenge+#2+-+Data+Setup.png

 

E.G #1.  The number 3 should be placed within the top left array on the Venn Diagram as it is a multiple of 3 but not a multiple of 4 or 5.

E.G #2.  36 should be placed within the top centre array on the Venn Diagram as it is a multiple of both 3 and 4 but not a multiple of 5.

 

NOTE:  A VI that can be used as a starting point is attached.

1343 Views
8 Comments
1523 Views
6 Comments

Assuming the Write to Measurement File Express VI is configured as shown below, what is the format of the data written to test.lvm during execution of the VI?

NOTE:  The file created may contain more than shown in the answers, this question is about the formatting of the data points and the Comment.

File dialog Configuration.png

File Dialog Configuration VI.png

File Dialog Configuration Answers.png

1512 Views
10 Comments

Assuming the Write to Measurement File Express VI is configured as shown below, what is the format of the data written to test.lvm during execution of the VI?

 

NOTE:  The file created may contain more than shown in the answers, this question is about the formatting of the data points.

 

 File+dialog+Configuration.png

 

 

File+Dialog+Configuration+VI.png

 

 

 File+Dialog+Configuration+Answers.png

 

1808 Views
9 Comments

Assuming the Build Text Express VI is configured as shown below with both Parameter1 and Parameter2 configured as Text (as shown), what is Result following execution of the VI?

configure Build text.png

Configure Build text VI.png

a) SteveLikesLabVIEW

b) SteveLikes,LabVIEW

c) Steve,Likes,LabVIEW

d) Steve Likes LabVIEW

1444 Views
10 Comments

Which of the following can be found within the Structures palette?

NOTE: Multiple answers may apply.

a) Local Variable

b) Timed Loop

c) Timed FOR Loop

d) Timed Sequence

e) Feedback Node

f) Flat Frame

1228 Views
6 Comments

Identify the Build Timing Source Hierarchy.vi from the Timed Structures Palette?

Timed Structures Palette.png

1332 Views
13 Comments

Assuming an initial value for Numeric Value In of -1, what is the value of Numeric Value Out following execution of the VI?

 

Split+and+Join+#2.png

 

a) 0

b) -1

c) 65535

d) -65535

1453 Views
9 Comments

What are the values of Boolean Value Out 1 and Boolean Value Out 2 following execution of the VI?

Number to String to Number.png

a) Boolean Value Out 1 = FALSE, Boolean Value Out 2 = FALSE

b) Boolean Value Out 1 = FALSE, Boolean Value Out 2 = TRUE

c) Boolean Value Out 1 = TRUE, Boolean Value Out 2 = FALSE

d) Boolean Value Out 1 = TRUE, Boolean Value Out 2 = TRUE

1386 Views
9 Comments

What is the value of Numeric Value Out following execution of the VI?

Boolean to Number.png

a) 1

b) 8

c) 16

d) 32

1786 Views
17 Comments
1541 Views
9 Comments

Which of the following statements is TRUE regarding Type Def. and Strict Type Def.

NOTE:  Multiple answers may apply.

a) A Type Def. or Strict Type Def. Terminal or Constant can be identified on the Block Diagram or Front Panel as it will have a black triangle in the top left hand corner

b) Any Terminal or Constant can be made into a Type Def. from the "Make Type Def." option in the right click shortcut of the item

c) If you drop a Type Def. control onto the Block Diagram, LabVIEW automatically creates a Control on the Front Panel

d) If you drop a Type Def. control onto the Front Panel, LabVIEW automatically creates a Terminal on the Block Diagram

1454 Views
11 Comments

What are the contents of String Length Array Out following execution of the VI?

Path to String Length.png

Path to String Length Answers.png

1336 Views
9 Comments

Assuming a Current Time of:

Formatting Time Current Time.png

What are the contents of String Array Out following execution of the VI?

Formatting Time.png

Formatting Time Answers.png

1530 Views
9 Comments

Which of the following shows the contents of String Length Array Out following execution of the VI?

String Length of Constants.png

String Length of Constants Answers.png