From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

SystemLink Forum

cancel
Showing results for 
Search instead for 
Did you mean: 

PXIe-5160 NI-DAQmx - creating physical channel - no supported devices found

Solved!
Go to solution

I use PXie-5160 to measure the Voltage. The self-test and test panel display well, also display well on Windows device manage. But when I use NI-DAQ>>Aquire Signals>>Analog Input>>Voltage, it said no supported devices found.

I am using LabVIEW 2021 version. Could anyone tell me why?

0 Kudos
Message 1 of 2
(1,039 Views)
Solution
Accepted by Healthy

The PXIe-5160 is an oscilloscope. It uses the NI-Scope driver softwares not the NI-DAQmx driver software. The NI MAX (Measurement & Automation Explorer) interface is using the NI-Scope software to control the PXIe-5160.

 

0 Kudos
Message 2 of 2
(1,016 Views)