USB-1359 not found in NI MAX

[hussey]

Hi guys!!

I am trying to find support for NI USB 1359 with Windows 10 and LabVIEW 2017.

I installed all required software but some silly mistake which I am not able to catch and it didn't show in NI MAX. Can any one help to find it out.

I Know product get obsolete in 2018 but it should support on LabVIEW 2017 platform with windows 10.

Your valuable feedback will help me to short out the issue.

[hussey]

oh...no one is their..

Get to know about real case 

https://forums.ni.com/t5/LabVIEW/Need-64-bit-Windows-7-driver-for-USB-1359-controller-for-my-SCXI/td...

Still is their any hope to make it possible.

[santo_13]

An interesting discussion to read, thanks for sharing.

Unfortunately, based on those discussions, you're using an outdated HW on a modern OS, either upgrade the HW or downgrade the OS. If you cannot convince the management to upgrade HW, convince the IT dept to downgrade OS.

Obviously one can't expect a Win10 or Win11 to work on a Pentium 3 system.

[hussey · Accepted solution]

At the end ............Found solution...…..

Ask me what?

Worked with Windows 10, 32 bit platform.