From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Home Community Discussion Forums Additional NI Product Boards Switch Hardware and Software Topic

Switch Hardware and Software

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Problems with the NI2503

Problems with the NI2503

‎08-21-2001 08:49 AM

I want to connect 120 Vdc to an open relay in this mux. Normally when the relay is closed, it is just allowed to connect 60 Vdc. Will it be a problem if I connect 120 Vdc to an open relay?
0 Kudos
Message 1 of 2
(6,878 Views)
Reply

Re: Problems with the NI2503

‎08-23-2001 10:57 AM

Dear Sir,

Thanks for using the Developer Zone.

I strongly suggest you not to connect any signal having voltage above 60 VDC to the relays even being an opened relay. It has to do with the isolation from the circuitry of the board.

Best Regards

Omar De Andrade
Computer Based Instruments
0 Kudos
Message 2 of 2
(6,878 Views)
Reply