Switch Hardware and Software

cancel
Showing results for 
Search instead for 
Did you mean: 

PXI-2003 can i use it as MUX and DEMUX ?

Salve
I Can use  Multiplexer PXI-2503 part as MUX and part as demux ?
and how can i expand one mux 48x1 with another mux, for 96x1 ? How i have to connect signals of boards, and how i have to drive the PXI-2503 for this ?
 
Thanks
 
Marcello
0 Kudos
Message 1 of 2
(6,301 Views)

The 2503 can be used as a DEMUX, when the topology that is used is a matrix. This kind of topology can also be used to create a Multiplexer (even if it is not a very efficient way to use it as far as resources go).

You can expand your Mux topology to become a 96x1 1-wire using 2 2503 modules, 2 2605 Terminal Blocks and an analog bus extender.

As far as examples go, it actually depends on the Application Dev Environment you are using, but once NI-SWITCH Driver

 is installed, you will find a whole set of examples just by selecting

Start>>Programs>>National Instruments>>NI-SWITCH>>Examples

Also you should be looking at the NI-SWITCH Online Help (.chm file) which documents everything you can actually do with your switch modules.

If you are able to explain a bit more in detail what you are willing to do with the 2503, I'd be more than pleased to help.

AlessioD

0 Kudos
Message 2 of 2
(6,288 Views)