Automatic Current Consumption Charges Monitoring system with power theft detection

[santhosh12]

The project deals with the day to day problem. In home, domestic and industries energy meter are provided by the electricity board to note the amount of power consumed and a equivalent amount of money is collected according to the usage. Actually this calculation is carried by human power the employees go to every house and industries and note down the meter reading. In our project we found a solution to make this as an automated process the meter reading is directly transmitted to server system provided in substation. For every two month electricity reading are taken by the electricity board. if the users were not at home it becomes difficult for them to get noticed about it and pay electricity bill. so we have used LabVIEW to solve this problem by making an automated system that also reduce human errors.. LabVIEW program allow them to monitor the power consumed in home using a single click ,the total power consumed and its equivalent rupees is sent as message to the mobile number given by the user and a mail will be sent to their mail id. This saves human power time and the payment of bill is brought into user notice easily and the late payment of bill can be reduced. A record can me maintained automatically. LabVIEW provides a simple platform to complete our task. It is scientifically proven that error occurs when a human does some work. In case of power supply mostly in Tamilnadu there is lack of power transmission and this device will help to make a detailed note of transmissions. The device that we are going to build consists of unique id number so that it is easy to identify each system. With the help of electrical power suite available in LabVIEW 2011 the calibration process can be made successfully. Transmission can be made with the help of NI WSN network The power theft can be identified ,actually we planned to have monitoring system at both the ends of a transformer so that the power at the transmitting and receiving end should be equal with respect to loss,if there is any variation then current theft can be identified. this whole process is processed only using labview.

[shibani111]

Dear sir,

           could you please help me to implement this application in my project