From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
I use a NI USB-6259 board with SignalExpress to trigger a mechanical shutter and a camera. I've written my own formula to control the time between each time the shutter opens and closes. However, it seems that the output is different from the input I wrote. Even with a more simple signal (a sine), there is a time between two blocks of signal where the signal is constant. This time can dure from 15 ms to 120 ms. I wonder if the problem comes from the software (but I doubt it, I don't see why it could do that) or the board itself. Has someone encountered this kind of problem ?
