Signal Generators

cancel
Showing results for 
Search instead for 
Did you mean: 

RF Synchronization Suite

Hello! 😄 I’m currently trying the sample codes included in the RF Synchronization Suite. However, I’m having a hard time understanding the effect of the “phase offset” on the IQ data which I generate (or acquire).

 

For the generation part, I’m testing the sample code named “PXIe-5673 Phase Coherent Arb Waveform Generation with NI-TClk Example”. If for example, I entered 0° as my phase offset for channel 1 and then entered 10° as my phase offset for channel 2, does that mean that my data for channel 1 is AMPLITUDE1∠0° and my data for channel 2 is AMPLITUDE2∠10° in polar form? If so, do I enter these values before running the code, or while running the code (and after which I click the “Update Phase Offsets” button)?

 

Thank you very much for your time! God Bless! 😄

0 Kudos
Message 1 of 3
(5,415 Views)

The answer to this forum post can be found at:

http://forums.ni.com/t5/RF-Measurement-Devices/RF-Synchronization-Suite/m-p/1828839

 

<Joel Khan | Applications Engineering | National Instruments | Rice University BSEE>


0 Kudos
Message 2 of 3
(5,386 Views)

 

If the link in my previous post fails try the link below.

http://forums.ni.com/t5/RF-Measurement-Devices/RF-Synchronization-Suite/m-p/1828839

 

<Joel Khan | Applications Engineering | National Instruments | Rice University BSEE> 


0 Kudos
Message 3 of 3
(5,376 Views)