Signal Generators

cancel
Showing results for 
Search instead for 
Did you mean: 

Generate Arbitrary Waveform with High Current

Dears,

 

I need to build an Arbitrary Waveform from VI, then send to an Coil to generate a magnetic field. The waveform in the coil should have high current (1A) for generation of high magnetic field. What the device should I need? Device 1, device 2 ...?

 

LabVIEW VI generate Arbitrary Waveform ======> Device 1 (A/D) ======> Device 2 (D/A + Power amplifer) ======> Coil with high current (1A).

 

Thanks you!

 

0 Kudos
Message 1 of 3
(2,697 Views)

How many connections does your coil need?

0 Kudos
Message 2 of 3
(2,614 Views)

Depending on the coil and frequency needed, 1A could be a 'high' current...

 

up to 100kHz a voltage controlled current source with a moderate power OP should do the job.

for more current :APEX power amplifier

Depending on the coil used and the frequency needed the voltage rating schould be the next question ...

If you want to buy a voltage to current amplifier you can look at BEAK, maybe phone them, I know the amps can do that.

 

 

 

Greetings from Germany
Henrik

LV since v3.1

“ground” is a convenient fantasy

'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'


0 Kudos
Message 3 of 3
(2,598 Views)