Signal Conditioning

cancel
Showing results for 
Search instead for 
Did you mean: 

SCC-68

Solved!
Go to solution

Hi,

 

Why SCC-68 board is dropped out from the newest DAQmx? It would be nice to use it together with SCC-TC01 thermocouple modules. Is there anyway to get this working with M- series USB DAC cards like USB-6255 with NI MAX 20.70?

 

scc-68 missing.png

 

BR,

Ilkka

0 Kudos
Message 1 of 4
(183 Views)
Solution
Accepted by topic author Yltsä

Looks like SCC-68 is supported for Connector 0 only and not on Connector 1 (this is on DAQmx20.0)

santo_13_0-1634334955421.png

 

Please connect SCC-68 to connector 0 and select the same in configuration.

 

I believe, nothing is limiting you from using SCC-TC01 with SCC-68 (once you have connected it to Con0)

 

 

-Santhosh
Semiconductor Validation & Production Test
Soliton Technologies
NI CLD, CTD
LabVIEW + TestStand + TestStand Semiconductor Module (2013 - 2020)
NI STS for Mixed signal and RF
Message 2 of 4
(163 Views)

Hi Santhosh,

 

Thank you very much for the quick reply. I will test this in the next week when all the relevant hardware is here.

 

Have a nice weekend,

Ilkka

0 Kudos
Message 3 of 4
(144 Views)

Hi,

 

I am now testing the SCC-68 card and SCC-TC01 module with USB-6255.

 

Unfornately the temperature measurement is not working with this combination. But the same sensor is OK with NI USB-TC01 device. We have similar experiences also before, that the SCC-TC0X temperature modules do not work with the current DAQmx and USB data acquisition cards.

 

I use DAQmx 20.70. Do you know, if there is any hope to measure temperatures with SCC-TC01 module and for example USB-6255 device? The analog input works in SCC-68 and can measure voltages directly.

 

The SCC-68 card is possible to select in MAX but its configuration is disabled. Cannot make any changes:

 

Ylts_0-1634833576706.png

 

BR,

Ilkka

 

0 Kudos
Message 4 of 4
(58 Views)