From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
04-20-2009 11:24 AM
04-21-2009 04:21 AM
Hi,
I have looked on the NI.com website and there is no module with the number SCC-A107.
However there is a SCC-A10 which is a voltage attenuation module.
Please find the link below:
http://sine.ni.com/nips/cds/view/p/lang/en/nid/1714
If it is here is the web link to the manuals resorces provided on the internet?
Hope this helps
Best regards
04-21-2009 04:22 AM
here is the manuals link
04-21-2009 09:30 AM
Hi,
Thanks lot. I want to know that is there any amplification to the siganl by these SCC-A10 modules.
Best
CC12
04-21-2009 10:03 AM
Hi,
If you read throught the manuals they explain the designed purpose for these signal conditioning blocks.
but how much there is may vary.
Regards
04-21-2009 06:40 PM
Hi,
Thank, At the end I got it. It has a gain of 200.
Best
10-20-2011 03:59 PM
well easy enough to find
http://sine.ni.com/nips/cds/view/p/lang/en/nid/3890
lets see a107 oh the seventh item
spec sheet page 9
http://www.ni.com/pdf/products/us/4daqsc253-265_194-196.pdf
scc-a107 is 50mv in and gain 200 so 10v out (50 x 200)
i bought a couple they are two channel single ended
so one channel differential input (i got caught on this too)
hope this helps