Real-Time Measurement and Control

Showing results for 
Search instead for 
Did you mean: 

sbRIO 9606 connects than disconnect

Go to solution

sbRIO 9606 connects than disconnect

Hi all,

I have the same phenomenon with and .


But my hardware is sbRIO 9606. Can i use this method, " install the latest version of NI-TimeSync to the cRIO and PXI found here:" , to solve the problem?


Thanks a lot!!! 

0 Kudos
Message 1 of 3
Accepted by topic author iDeam
08-27-2015 04:09 PM

Re: sbRIO 9606 connects than disconnect

It is possible that the same recommendation would solve your problem as it does affect sbRIO boards as well.  The issue is very specific though and only afffects boards with a static IP address defined, running NI-TimeSync 1.1 with some other settings.  If you're using a static IP address on your 9606 and have NI-TimeSync 1.1 installed, I would definitely recommend upgrading the version of NI-TimeSync on your host PC and then on your 9606.

Alex Person
NI-RIO Product Support Engineer
National Instruments
0 Kudos
Message 2 of 3

Re: sbRIO 9606 connects than disconnect

Thank you!!

After i updated to 1.1.3, the problem was solved.

0 Kudos
Message 3 of 3