Real-Time Measurement and Control

cancel
Showing results for 
Search instead for 
Did you mean: 

ni9505 isolation

Hi,

 

On the first place , thanks for your attention . I was wondering if the NI 9505 has inbuilt isolation between the motor power supply part and the control part .

 

Thanks,

 

Albert

0 Kudos
Message 1 of 2
(3,608 Views)

Hi Albert,

 

I have found the manual for the NI9505 which contains information on drive protection on the device.

 

http://www.ni.com/pdf/manuals/374211f.pdf

 

Having looked through the manual.  On page 28, it states 'Motor terminal short to ground' and 'Motor terminal short to Vsup' are both 'Yes'.  There is also some information on the safety voltages on page 32 of the manual.

 

I hope that helps.  If you have any other questions, please feel free to post back.

 

Kind Regards,

Oli
LabVIEW Student Ambassador
National Instruments UK
0 Kudos
Message 2 of 2
(3,584 Views)