Real-Time Measurement and Control

cancel
Showing results for 
Search instead for 
Did you mean: 

compactrio and 9237 getting started

Solved!
Go to solution

Hi,


I'm new in Labview. I have a Compactrio 9076, connected with a module 9237 and a Load Cell. I already connected everything with success ( NI 9237 Getting Started.vi is connected and working without problem), but when I try to compile the example: NI 9237 Getting Started (Host).vi some wires show error. I attached the image.

How can I solved it, in order to compile the example (Host)?


Thanks in advance.

 

 

0 Kudos
Message 1 of 3
(3,331 Views)
Solution
Accepted by DinC

You need to configure the Open FPGA Reference to point to the bitfile you generated for the FPGA.


GCentral
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
"Not that we are sufficient in ourselves to claim anything as coming from us, but our sufficiency is from God" - 2 Corinthians 3:5
Message 2 of 3
(3,327 Views)

is your problem solved????

0 Kudos
Message 3 of 3
(2,380 Views)