Real-Time Measurement and Control

cancel
Showing results for 
Search instead for 
Did you mean: 
Reply

What is the common mode range of the 6033E Daq Card?

Highlighted
I'm reading the voltage accross a 10 ohm resistor in
Differential mode. There is 1 AMP DC current
flowing = 10 volts.

When the UUT fails, the voltage on one side of the
resistor could go as high as 50 volts.

That's why I would like to know if the common mode
voltage of the DAQ is withing 50 volts.

thank you...

\\carlos_diaz
0 Kudos
Message 1 of 3
(1,839 Views)
For DIFF mode, V+ and V- in have to be within +/-11V of AIGND. You'll probably have to go with NRSE.
0 Kudos
Message 2 of 3
(1,839 Views)
Thanks tnewton:
What is the common mode range for NRSE? for the 6033E
board?
0 Kudos
Message 3 of 3
(1,839 Views)