From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
Real-Time Measurement and Control
Recommended C series I/O module to get started with C RIO
Ok. So I decided to get into the Embedded control and Monitoring world, and just purchased the NI-9053 C-Rio, so I would like expert suggestions on the most 'prudent' C series I/O module to buy for a start to get my self quickly up to speed in this new area. I have only seen images of this on the NI website with only the DB37 male Connector end showing up (I hope the other end fits /matches with the port/slot on my CRIO because that is definitely not a DB37.
So yes I would be glad to know if I am making the best choice at this point or is there some other I/O module you would recommend especially if getting started to develop this new skill?
![[BADGE NAME]](https://forums.ni.com/t5/image/serverpage/image-id/231669i2EB958E4CA07AC34/image-size/thumb/crop-image/true?v=1.0&px=150/image-size/thumb/is-preview/true?v=1.0&px=150)
