Real-Time Measurement and Control

cancel
Showing results for 
Search instead for 
Did you mean: 
Reply

PXIe-8381 and PXI-8384 could not work

Highlighted

PXIe-8381 and PXI-8384 could not work

I want to build a realtime sysytem, use one PXIe-8840 ,three PXIe-1075 Chassis ,two PXIe-8381,two PXIe-8384,but some PXI card could not work after I install the software for rt system。When I use only two PXIe-1075, the system is OK. Pls give me some support for MXI use. The software is Labview 2015 Sp1 EN and Driver DCD-Aug16, DAQmx 16.0.wx_camera_1489896595774.jpg

0 Kudos
Message 1 of 5
(445 Views)

Re: PXIe-8381 and PXI-8384 could not work

The first troubleshooting step I would try is to put both PXIe-8384s into the same chassis with the PXIe-8840. This will change a couple of things about power on enumeration and may either resolve the problem or give another clue about what's going wrong.

 

Robert

0 Kudos
Message 2 of 5
(422 Views)

Re: PXIe-8381 and PXI-8384 could not work

2.PNG

Thanks for reply! As the picture 2 shows, I install two PXIe-8384s in slot 17 and slot 18,and the first PXIe-8384 connect the second chassis and the second PXIe-8384 connect the third chassis. NI MAX also had the same problems. The slot 2,3,4,6,7,8,9 of the second chassis and the slot 8 ,9 of the third chassis are not OK. The PXIe-4300 shows PXIe-4300 "PXI94::0::INSTR" ,and the self test is bad and reset is not work.

0 Kudos
Message 3 of 5
(400 Views)

Re: PXIe-8381 and PXI-8384 could not work

if self test goes bad, i suggest you may consider report for damaged device test

0 Kudos
Message 4 of 5
(313 Views)

Re: PXIe-8381 and PXI-8384 could not work

The problems still could  be sloved,I change all cards positions,but the rt system show error.I change theMAX version, the rt system is not ok.

0 Kudos
Message 5 of 5
(292 Views)