Real-Time Measurement and Control

cancel
Showing results for 
Search instead for 
Did you mean: 

Migration : CompactFieldPoint to CompactRIO

Solved!
Go to solution
Highlighted

Hello, 

 

I have an acquisition systeme based on CompactFieldPoint boards as following :

- cFP-1808

- cFP-QUAD-510

- cFP-CTR-500

- cFP-AI-112

- cFP-RLY-425  

 

I want to create another acquisition system that have at least the same I/O type and number but using CompactRIO boards. I need some help to find these references. 

 

Thank you in advance !

0 Kudos
Message 1 of 3
(1,750 Views)
Highlighted
Solution
Accepted by topic author BlueAnaconda

Houssam_AZ

 

Have you seen this white paper? http://www.ni.com/white-paper/52272/en/

It should answer your questions regards to migrating from cFP to cRIO. If there is something that is not clear or you have more questions feel free to post again. 

Alternatevely, you can call NI at (888) 280-7645 for a NI engineer to assist you with your migration. 

0 Kudos
Message 2 of 3
(1,712 Views)
Highlighted
Solution
Accepted by topic author BlueAnaconda

You can also consider CompactDAQ Controller - a standalone DAQ system. This doesn't have the FPGA that the cRIO does but still is a pretty wicked upgrade over the cFP.

 

 

0 Kudos
Message 3 of 3
(1,151 Views)