Real-Time Measurement and Control

cancel
Showing results for 
Search instead for 
Did you mean: 

Error with lvanlys.dll loading when deploying code on cRIO-9073

Highlighted

Hi All,

 

 

I'm actually blocked with my project due to a known deployement error on cRIO-9073. It is related with the "lvanlys" library.

I'm using LabVIEW 9 and each time I try to deploy my code on the cRIO, it terminates with error like "LabVIEW: Failed to load ..... lvanlys .....on RT target device".

 

I've seen old posts about this problem, but no real solutions. I've also seen that a fix is present in LabVIEW 9 (52841 - 4CMBQFFK - lvanlys.dll causes errors on RT system).

 

As last test, I've removed from my main VI, all the sub-VIs that contain calls to this lvanlys library and the deployement is ok.

 

Thanks for your ideas & help.

 

 

Synthesis

 

 

 

0 Kudos
Message 1 of 3
(2,320 Views)
Highlighted

Hi Synthesis,

 

- Is the problem still there if you reboot your cRIO?

- Did you try to reinstall the SW on your RT target (format drive>reinstall SW) ? This could probably arise because of a software corruption on the target.

 

Cheggers

Sascha
0 Kudos
Message 2 of 3
(2,299 Views)
Highlighted

Setting the NI RIO Software version on the target to 3.2.1 (minimal) fixes this problem.

0 Kudos
Message 3 of 3
(1,786 Views)