Real-Time Measurement and Control

Showing results for 
Search instead for 
Did you mean: 

Device is not recognized by PC



I have an NI cRIO 9082 and I am having trouble getting it connected to the PC. I have set up the connection according to the instructions however I do not see the device in NI MAX or any other software. Any type of reset of the device or its IP address simply results in the 169.254.x.x address and is not recognized on my computer. I have updated all drivers and software according to my device but still I have found nothing and have consulted several forums as well as troubleshooting guides and FAQs which have all made no difference. 


How can this problem be resolved?

0 Kudos
Message 1 of 2

How many network connections do you have on your PC.  We just ran into a situation where MAX was trying to search for the cRIO over the wireless network card instead of the Ethernet port that it was directly connected to.  Had to do into some weird Windows 7 settings to make the Ethernet port the primary network connection.

There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
"Not that we are sufficient in ourselves to claim anything as coming from us, but our sufficiency is from God" - 2 Corinthians 3:5
0 Kudos
Message 2 of 2