Real-Time Measurement and Control

cancel
Showing results for 
Search instead for 
Did you mean: 

Chassis Temperature in NI cRIO-9072

I would like to make temperature drift compensation for accelerometer.

There are 2 possibilities:

1) Use thermocouple module

2) Use Chassis Temperature of build in into cRIO-9072 temperature sensor.

I do not need extreme precision so plus minus 1 degree is not an issue.

Is it OK to use Chassis Temperature for it and how to convert it into degree C(could not find conversion in module specific folder)?

0 Kudos
Message 1 of 2
(1,990 Views)

The only proplem with using the chassis temperature is that it is measuring the temperature of the chassis and the heating of the electronics will give you a pretty different reading from the actual surroundings.  If you want to try it out look here in the examples folder:

 

 

Message Edited by StevenA on 08-22-2008 08:02 AM
SteveA
CLD

-------------------------------------
FPGA/RT/PDA/TP/DSC
-------------------------------------
0 Kudos
Message 2 of 2
(1,986 Views)