Benchtop Measurement and Test
Distributed Measurement and Control
High-Performance Test
Systems Engineering Software
Perspectives showcases how NI sees what’s next in the world of test and technology.
You can request repair, RMA, schedule calibration, or get technical support. A valid service agreement may be required.
Provides support for NI data acquisition and signal conditioning devices.
Provides support for Ethernet, GPIB, serial, USB, and other types of instruments.
Provides support for NI GPIB controllers and NI embedded controllers with GPIB ports.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
07-25-2019 06:45 PM
안녕하세요
기존 2015랩뷰 버젼에서 X-Control을 사용하여 프로그램 설계에 적용해왔습니다
NXG가 출시되고 시대의 흐름에 따라가기위하여 NXG3.1에서 X-Control이 설계되는지 확인을 해보니깐
기존 랩뷰2015에는 새 프로젝트을 만들고 마우스 우클릭으로 "새로 만들기" 버튼을 선택하면
X컨트롤 추가 항목이 있는데 NXG는 없더라구요..
또한 NXG3.1 에서 지원하는 마이그레이션(Labview코드 -> NXG 코드로 변환)을 해봤는데
변환만되고 X-Control에서 가장 중요한
프런트 패널이 설계한 UI대로 나오지 않고 기본UI로 바뀌어져 나오더군요
(사용자가 설계한 여러 컨트롤 및 인디게이터가 하나의 컨트롤로 통합되어 나오지 않음)
ni홈페이지 들어가니깐 NXG에서 X-Control 지원해준다는 말은 있긴한거 같은데 잘모르겠습니다
NXG에서 Labview처럼 X-Control을 설계방법을 지원을 해주는지 궁금합니다
감사합니다
07-28-2019 08:39 PM
흠... 찾아보니까
LabVIEW 와 NXG 의 차이점을 기술하는 문서에서 LabVIEW 의 X 컨트롤은 일반 참조 번호로 대체하여 사용해야 한다고 적혀 있는 것 같네요. 한번 확인해 보세요.
http://www.ni.com/documentation/ko/labview/latest/migration/differences-labview-labviewnxg/
What do you need our team of experts to assist you with?
Thanks!
We'll be in touch soon!