Phase Matrix Products

cancel
Showing results for 
Search instead for 
Did you mean: 

QuickSyn FSL0010

Solved!
Go to solution
Highlighted

Hello,

I am using a QuickSyn FSL0010.
I manage to communicate with him via NI-MAX and the VISA test panel.

 

All commands work except those related to the RF output.
OUTP: STAT ON / OFF -> Does not change the RF output state
OUTP: STAT? -> Returns an error

 

This QuickSyn is integrated in an automatic test bench, so I must be able to use these commands

 

Anyone have an idea?

Thanks

0 Kudos
Message 1 of 6
(894 Views)
Highlighted

Hello

 

You can use 02 command to get output state and use 0F01/0F00 to enable or disable the output, see detailed command description in attached screen shots.

 

Regards,

Frank

Download All
0 Kudos
Message 2 of 6
(686 Views)
Highlighted

Hello,
Thank you for your reply.
But I don't want to use SPI commands
I need these functions but with SCPI commands

 

Regards,

Vincent

AfgVD_0-1586251602705.png

 

0 Kudos
Message 3 of 6
(682 Views)
Highlighted
Solution
Accepted by topic author AfgVD

Hi Vincent

 

These two commands also can be used as SCPI, you can try it as showed in attachment. Seems that commands OUTP: STAT ON / OFF and OUTP: STAT? are not supported on FSL-0010, we had the same situation before.

 

Regards,

Frank

0 Kudos
Message 4 of 6
(679 Views)
Highlighted

Hi Frank,

OK, thanks. I'm not on site these days.
As soon as possible I will try

 

thanks again

Regards

Vincent

0 Kudos
Message 5 of 6
(657 Views)
Highlighted

Hi Frank

It works with commands 0F01 / 0F00.

 

Thanks again for your help

0 Kudos
Message 6 of 6
(605 Views)