Phase Matrix Products

cancel
Showing results for 
Search instead for 
Did you mean: 

QuickSyn FSL0010

Solved!
Go to solution
Highlighted

Hello,

I am using a QuickSyn FSL0010.
I manage to communicate with him via NI-MAX and the VISA test panel.

 

All commands work except those related to the RF output.
OUTP: STAT ON / OFF -> Does not change the RF output state
OUTP: STAT? -> Returns an error

 

This QuickSyn is integrated in an automatic test bench, so I must be able to use these commands

 

Anyone have an idea?

Thanks

0 Kudos
Message 1 of 6
(872 Views)
Highlighted

Hello

 

You can use 02 command to get output state and use 0F01/0F00 to enable or disable the output, see detailed command description in attached screen shots.

 

Regards,

Frank

Download All
0 Kudos
Message 2 of 6
(664 Views)
Highlighted

Hello,
Thank you for your reply.
But I don't want to use SPI commands
I need these functions but with SCPI commands

 

Regards,

Vincent

AfgVD_0-1586251602705.png

 

0 Kudos
Message 3 of 6
(660 Views)
Highlighted
Solution
Accepted by AfgVD

Hi Vincent

 

These two commands also can be used as SCPI, you can try it as showed in attachment. Seems that commands OUTP: STAT ON / OFF and OUTP: STAT? are not supported on FSL-0010, we had the same situation before.

 

Regards,

Frank

0 Kudos
Message 4 of 6
(657 Views)
Highlighted

Hi Frank,

OK, thanks. I'm not on site these days.
As soon as possible I will try

 

thanks again

Regards

Vincent

0 Kudos
Message 5 of 6
(635 Views)
Highlighted

Hi Frank

It works with commands 0F01 / 0F00.

 

Thanks again for your help

0 Kudos
Message 6 of 6
(583 Views)