08-05-2009 09:47 AM
08-06-2009 02:52 PM
Hello!
Thank you for posting to the NI Discussion Forums! The NI Switches Help is a help document that is installed with the NI-SWITCH driver. In the help document you will find information on disabling digital filtering and attenuation.
The steps to disable digital filtering are as follows:
Disabling Digital Filtering
Caution When digital filtering is disabled, it is possible for the switch module to be triggered by noise on the PXI trigger lines. If the device triggering the switch is capable of sending pulses greater than 150 ns, you should not disable digital filtering. |
For information on attenuation, I would recommend typing "attenuation" into the search field within the NI Switches Help to read the whole article. Here's a screen shot of the first part of it.
Hope this helps!