PXI

cancel
Showing results for 
Search instead for 
Did you mean: 

The input and output resistances in Remote sense (4-wire)

Hello everyone !

I have searched the information about  input and output resistances in 4-wire mode. Not of results.

Where I can read about this concerning PXI-4140, 4132 ?

0 Kudos
Message 1 of 8
(3,049 Views)

Have you installed NI DC Power in LabVIEW? The help documentation has more information to supplement the manuals and spec sheets we have listed online.

 

http://search.ni.com/nisearch/app/main/p/ap/tech/lang/en/pg/1/sn/ssnav:drv/fil/phwebntpmdm:123596/

Chase
NI Technical Support Engineer
0 Kudos
Message 2 of 8
(3,023 Views)

Yes, I have seen this documentation. It named the NI DC Power Supplies and SMUs Help, but I did not find the information about the value of input (output) resistance

0 Kudos
Message 3 of 8
(3,012 Views)

I do not see this specified anywhere so far.

 

Can you give more information about why you need that information so that we can determine if there are other resources available?

Chase
NI Technical Support Engineer
0 Kudos
Message 4 of 8
(3,006 Views)

For example, I needed to measure with help PXI-4140 the small change of the voltage , and it value will be depends from outer resistance

0 Kudos
Message 5 of 8
(3,000 Views)

I found this documentation on 4 wire measurements 

http://zone.ni.com/reference/en-XX/help/370384N-01/dmm/4-wire/

 

What is the resistance range we are operating in?

Chase
NI Technical Support Engineer
0 Kudos
Message 6 of 8
(2,987 Views)

I do not need measure the resistance . I want to measure the small voltage with help SMU.

0 Kudos
Message 7 of 8
(2,960 Views)

Can you expand upon what you mean by the outer resistance, and what you are measuring?

Chase
NI Technical Support Engineer
0 Kudos
Message 8 of 8
(2,949 Views)