I am looking for some .NET examples (C#, VB.NET, or C++) on how to:
- Configure the Backplane Routing of the NI PXIe-1085 Chassis
- Configure the Active Routes of the NI PXIe-6674T Timing and Synchronization Module
More Details:
A trigger signal, PXI_Trig0, originates from one of the slots in the PXI chassis. The trigger needs to be routed across the PXIe-1085 chassis to slot 10. (i.e. the Backplane Routing needs to be configured by a .NET application.) Next, the trigger needs to be routed thru the PXIe-6674T to the PFI0 connector. (i.e. the Active Routes needs to be configured by a .NET application.)
I know how to do this using NI-MAX and the PXIe-6674T Test Panel. I just need to do it in .NET.