Benchtop Measurement and Test
Distributed Measurement and Control
Systems Engineering Software
You can request repair, RMA, schedule calibration, or get technical support. A valid service agreement may be required.
Provides support for NI data acquisition and signal conditioning devices.
Provides support for Ethernet, GPIB, serial, USB, and other types of instruments.
Provides support for NI GPIB controllers and NI embedded controllers with GPIB ports.
We are Using PXIe 8135 controller and PXIe 1082 chassis. I want a card compatible with this that can acquire data from an encoder.
Our current requirement is to get data from an encoder with 1000 pulses per revolution rotating at a rate of 6000 rpm.
So the card should be able read 100,000 pulses per second.
We are using this setup for a vibration analysis. To find the phase angle. (We already have a vibration card).
To get the exact phase angle we need to observe the rising edge of each encoder pulse with a minimum time error.
Therefore sampling at the Nyquist sample rate won’t be enough.
If we can go for a higher sampling rate, it will be the ideal scenario.
I’m thinking of purchasing PXI 6608 (Counter timer card for this purpose).
I would appreciate you guys expert opinion on whether this card will be suitable for our application or not?
And can I use a digital I/O card for this purpose instead of a Timer/counter card?
If so, could you please recommend a card for this application.
I look forward to hearing from you guys
What do you need our team of experts to assist you with?
We'll be in touch soon!