We have here several PXIe4472 modules and we were planning to use them for a test. We also have some iepe accelerometers. Going through the specifications of the module I've realised there's a high pass filter with a cutoff frequency of 3.4Hz when AC coupling is enabled. This is a huge problem for us since the first interesting phenomenon we want to capture is likely to happen below that. My question is then, can I enable DC coupling (to get rid of that filter) and still feed the IEPE accelerometers (typically they need a constant 4mA current)? I don't have all the equipment now with me and I cannot test it myself.
You could use the DAQmxChannel property node to set the coupling.
Sorry, I misunderstood the question.
Maybe this link might help clarify your question regarding using IEPE excitation together with DC coupling.
Thanks for your response. I'm afraid my question is more at a hardware level, when I DC couple a particular channel within a PXIe4472 can I still connect a IEPE Accelerometer or will I have to find an external current source because the module is not suplying it anymore (for DC Couple enabled). Not sure if I explain myself.