PXI

cancel
Showing results for 
Search instead for 
Did you mean: 

PXIe 2525 INOP

Solved!
Go to solution

I am having troubles getting my PXIe-2525 card up and running. I am hoping I am doing something foolish. Below is a detail of my setup and my troubleshooting so far. I hope someone has a nugget of information that get me on the right track.

 

Setup:

Windows 10 64 bit PC

PXIe-1078 Chassis

PXIe-8360 MXI card (for communications)

NI-SWITCH 18.0

NI-DAQmx 18.0

I always boot the PXI chassis up before my computer.

 

Troubleshooting:

In the same chassis I was able to get my PXI-2530B and PXI-6513 cards up and running.

I am able to see the 2525 card in my device manager but it says windows has not associated a driver with it. Any attempts to manually link the driver have been unsuccessful.

I have tried to re-install NI-SWITCH by first uninstalling and then re-installing. I have tried to repair NI-SWITCH from within the add/remove programs.

I have tried to switch the card position in the chassis.

 

I am at a loss for next steps. Please chime in if you have some ideas...

0 Kudos
Message 1 of 4
(1,255 Views)

 

Here are some snapshots of some points of interest...
ni_package_SS.pngni_max_SS.png

0 Kudos
Message 2 of 4
(1,240 Views)

Dr_Edward_D4H:

 

Can you please try this-> https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000P8awSAC

 

If this doesn't work for me look like the card is faulty and would be better supported from NI.

0 Kudos
Message 3 of 4
(1,217 Views)
Solution
Accepted by topic author Dr_Edward_D4H

Just to follow up...I was able to get the PXIe-2525 to work. Previously I had been uninstalling and reinstalling NI Switch discretely. The uninstall and reinstall of NI Switch using the NI Package Manager did the trick.

0 Kudos
Message 4 of 4
(1,216 Views)