10-16-2018 08:59 AM
Does anybody know what the power resistor (6Ohms, 50W) is for?
I changed the power supply and don't know its right to connect it directly to 12V?
Thanks for answers.
10-18-2018 07:09 AM - edited 10-18-2018 07:15 AM
Here is a picture. I checked with another working system. It gets really hot. What is this for?
10-22-2018 06:10 AM
Does anybody know? Thanks!
10-22-2018 08:07 AM
It looks like a heater ... does the manual says something about housing temperature control?
Or a minimum load for the switched power supply?
10-23-2018 01:48 AM
Thank you very much. This are my assumptions.
Does anybody knows for shure? Anybody from NI?
10-23-2018 06:21 AM
Hi,
I'm afraid no one from NI is going to share with you the details of Internal Chassis Construction. I strongly recommend sending your device for RMA in case it does not work as expected.
Mateusz.
10-23-2018 06:24 AM - edited 10-23-2018 06:39 AM
Thank you.
I think this is no secret. I can save 1/3 of the power if the resistor is disconected. So I installed a Switch for it. I think the resistor is for heating.