PXI-4110: Possible to independently configure +20V and -20V supplies?

[MFBELLINO]

With regard to the PXI-4110.... Is it possible to configure the +20V and -20V supplies non-complimentary? For example:

• +20V supply is set to +10V
• -20V supply is set to -5V

Also, in this configuration, could one supply be turned ON or OFF independent of the other? 

If so, any special programming notes to set parameters such as these?

Thank you.

[Letitsnow · Accepted solution]

Hi @MFBELLINO,

Yes, the 4110 has three channels that are independent of each other each supplying a DC voltage. They can be programmed to values non complimentary of each other. You could program channel 1 to +10V and channel 2 to -5V then turn off channel 2 and only have channel 1 outputting +10V.

You can find examples for configuring current and voltage at the following link.

http://digital.ni.com/public.nsf/allkb/3CECD9463C57EF9C8625729D006CD7A6

I hope this helps!

[MFBELLINO]

Thank you for the comprehensive answer. 

I'll follow up here if I garner any additional knowledge on this.