PXI

cancel
Showing results for 
Search instead for 
Did you mean: 

No switch simulated Ni-DAQmx

I have NI SWITCH installed but “switch” is not displayed as a device to simulate in NI-DAQmx. Compatibility, everything installed is version 20.0.

0 Kudos
Message 1 of 4
(706 Views)

NI SWITCH uses NI-Switch drivers and not DAQmx drivers.

 

Please use the NI-SWITCH palette

santo_13_0-1632964536726.png

 

It has been a very long time since the NI SWITCH driver took over all switch related functionalities from DAQmx (may be still supports a few but not recommend to use DAQmx driver)

 

Santhosh
Soliton Technologies

New to the forum? Please read community guidelines and how to ask smart questions

Only two ways to appreciate someone who spent their free time to reply/answer your question - give them Kudos or mark their reply as the answer/solution.

Finding it hard to source NI hardware? Try NI Trading Post
0 Kudos
Message 2 of 4
(688 Views)

Switch is not present for simulated NI-DAQmx Device. Even though NI-switch is installed.

Is there a config file or something?

This is a reinstall of LabView worked prior on old install.

0 Kudos
Message 3 of 4
(664 Views)

Looks like you did not install NI-SWITCH drivers

It should come up like this,

santo_13_0-1633009446427.png

 

You can install NI-SWITCH drivers from NIPM as part of Device Drivers or individually from NI website - https://www.ni.com/en-us/support/downloads/drivers/download.ni-switch.html#345632

 

Santhosh
Soliton Technologies

New to the forum? Please read community guidelines and how to ask smart questions

Only two ways to appreciate someone who spent their free time to reply/answer your question - give them Kudos or mark their reply as the answer/solution.

Finding it hard to source NI hardware? Try NI Trading Post
0 Kudos
Message 4 of 4
(660 Views)