08-16-2010 05:50 AM
Hi all,
I am using NI PXI 1042 for my academic project, to acquire the leakage current of insulators. For that we tried to use PXI 5112 card initially for acquiring the current waveform. As it is not possible to capture the current waveform directly using PXI 5112, we tried to use PXI 7831 Reconfigurable I/O device. But its not detecting in Measurement & Automation Explorer. Among the total 8 chasis, its shown "Empty" in the place corresponding to PXI 7831R. Please help me in resolving this issue of the problem with the device.. Also please clarify me about whether the 7831R device can be used for acquiring current signals (range varies from 0 to 200mA) directly without any current - to - voltage conversion as in the case of PXI 5112. Please help me in resolving this issue.
Thanks in advance....
Note: One more card PXI 7811 which is an I/O device, is also not detecting in M & A explorer. Its also shown Empty in the place corresponding to it.
Please help me in resolving the issues.
Solved! Go to Solution.
08-17-2010 01:10 PM
08-24-2010 03:09 AM
08-24-2010 01:40 PM
08-27-2010 06:06 AM
Hi,
The snapshots might not be uploaded due to bad network connection at the time of posting the message. Now I am attaching here... I dont know whether LabVIEW fpga module is installed in the PC I'm currently using for my academic project. Is it available in function palette of LabVIEW or as a seperate sofware, as Signal express... Please tel me about accessing the LabVIEW FPGA module...
08-27-2010 12:40 PM