PXI

cancel
Showing results for 
Search instead for 
Did you mean: 

How can I control individual pins of VHDCI connector on PXIe-6548?

Solved!
Go to solution

Unless you can post some screen shots or your code, I'm kind of at a loss.  The PXIe-6548 does support stimulus/response mode.  A device not found error generally indicates a that you haven't selected the correct device, not that a feature isn't present.

 

Can you share screen shots of what you're doing or your code?

0 Kudos
Message 21 of 35
(1,343 Views)

I am attaching the screenshots of the DWE and Signal Express windows. The first image shows DWE where I save the waveform in proper format with signal mapping on channels. The second image shows how stimulus response shows an error.

Download All
0 Kudos
Message 22 of 35
(1,339 Views)

Thanks - that's pretty helpful.

 

In SignalExpress, if you go to Help | About LabVIEW SignalExpress...

 

What versions of NI-HSDIO Express and Signal Express are you using?

 

Also, can you see your device in MAX?

 

I've attached a screen shot of my about panel.

0 Kudos
Message 23 of 35
(1,324 Views)

Hi, I have MAX installed and I can see my device in MAX. I have attached my About window. It is pretty much same as your image.

0 Kudos
Message 24 of 35
(1,317 Views)

What version is your NI-HSDIO?

0 Kudos
Message 25 of 35
(1,316 Views)

where do i find what version is my niHSDIO?

0 Kudos
Message 26 of 35
(1,305 Views)

If you look at my About window, you'll see NI-HSDIO Express toward the bottom.  Yours should also be in the About box.

0 Kudos
Message 27 of 35
(1,301 Views)

it says version 1.3.0.

0 Kudos
Message 28 of 35
(1,297 Views)

NI-HSDIO 1.3 doesn't support the PXIe-6548... 

 

Please upgrade to HSDIO 1.7.2:  http://joule.ni.com/nidu/cds/view/p/id/1625/lang/en

0 Kudos
Message 29 of 35
(1,281 Views)

Thanks very much Keith!

I upgraded it to 1.7.2 and tried to run the stimulus response. It shows the device now but gives another error. I am attaching the screenshot. Please tell me the possible reason for the error.

0 Kudos
Message 30 of 35
(1,274 Views)