01-12-2023 02:38 AM
Hello !!
I have a PXIe-1082 Chassis with two FPGA Card 7851R and 7820R. i have connected the PXI system to a PC via MXI. When i try to load the FPGA bit file to 7820R i get the above error which is stated in the subject. but i am load the FPGA model which was built for 7851R card successfully.
i have not connected any of the DIO lines. its a brand new card and i was just checking if the FPGA Code/Models can be successfully loaded. is it software error (related to any of the drivers) or HW issue.. i have the second setup with same chassis and same Card and i see the same issue in that Chassis also.. Any help to resolve this problem is highly appreciated.
i am using Labview 2020 32 bit version of the software.
regards
Kiran
01-12-2023 06:00 AM
Are you running a shipping example? How are you loading a bitfile?
01-12-2023 06:58 AM
Hello Terry..
what do you mean by shipping example.. i am loading the bit file using the labview VI (Open FPGA VI ).
even i tried using veristand (FPGA Addon Custom device) and tried deploying. i get error in Veristand also.
Refer the attached images..
thanks
01-12-2023 07:10 AM
see https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000YIKbCAO&l=en-US
Can you open an example project and VI for this hardware and try running it?
01-12-2023 07:49 AM
Thanks for sharing the link. i get the same error with the shipping example also.
refer attached image
01-12-2023 07:57 AM
@KiranKeshavegowda wrote:
Thanks for sharing the link. i get the same error with the shipping example also.
refer attached image
the examples are tested and are supposed to work, they are best starting place and sanity check
your problem is likely hardware or drivers and not a LabVIEW/software issue