01-31-2006 10:17 AM
02-01-2006 04:10 PM
Hi Ken,
One thing to look out for is that the second port is by default is in low speed configuration, so keep that in mind. As long as you have the driver that came with the 8464 installed, then there should be no difference in the setup. If you want specific specification differences, check out the data sheet here (also linked below). Page 4 and 5 show the spec differences between the two boards. You can also see the differences in the NI-CAN driver versions by viewing the readme.htm (or .txt) from the driver CD or driver download page. The latest version is NI-CAN 2.3.2.
I hope this is the information you are needing, but if you have any other questions, please let me know!
Chris R.
Applications Engineer
National Instruments
http://www.ni.com/pdf/products/us/3ic744-747.pdf
02-01-2006 04:38 PM - edited 02-01-2006 04:38 PM
Message Edited by Ken0 on 02-01-2006 04:38 PM
02-02-2006 08:01 AM - edited 02-02-2006 08:01 AM
I am sorry you had trouble with the first system, but I am glad you were able to get the second system working faster. If you think the process is too complicated, please go to ni.com/contact to submit a product suggestion to improve our products. Your feedback is greatly appreciated!
If you have any other questions, just let me know!
Chris R.
Applications Engineer
Message Edited by Chris_R. on 02-02-2006 08:03 AM
02-02-2006 08:40 AM
02-03-2006 08:55 AM
02-03-2006 08:58 AM