From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
10-24-2013 08:07 AM
10-25-2013 09:58 AM
more details
10-25-2013 05:44 PM
Hi Sermsak,
Do you use this code set for a wide number of modules? Is this error you are seeing new? Do you encounter it with multiple modules? Have you ever been able to successfully make it through the code without any errors?
Also, what verson of NI-DMM do you have? What version of LabVIEW are you using?
10-27-2013 12:26 AM
Good Day Thomas B.
dmm version 3.0.5
labview version 12.0.1f4
In ACV function, I never successfully make it without errors.
Best Regard,
Sermsak.
10-28-2013 08:21 AM
Hi Sermsak,
You may want to look through the Test Conditions section (p. 5) of the Calibration Manual for the PXI-4071. Pay careful attention to the grounding, as well as the power suggestions, such as ensuring that everything is plugged into the same power strip. These types of factors can influence the AC filter components of the calibration procedure.
Take a look through this section to make sure everything is optimally connected and let me know if it makes any difference.
10-28-2013 09:20 AM - edited 10-28-2013 09:22 AM
Dear Thomas B.
All test conditions are correctly, Sir.
But I have a question about adjustment procedure PXI-4071.
Becase PXI-4071 maximum frequency for ACV refer from specification only 300 kHz.
Why? the adjustment procedure was setting at 500 kHz.
I will try to test again and waiting the solution.
Thank you, Sir.
Best Regard
Sermsak k.
10-29-2013 04:29 PM
Hi Sermsak,
From the behavior you are seeing, it looks like we may need to set up a Return Merchandise Authorization. There is a link on this page that gives direction regarding getting it set up.
10-29-2013 08:24 PM
Hi Thomas B.
Thank you for information.
I have 2 PXI-4071 and during adjustment have a same error.
Best Regard,
Sermsak k.
10-30-2013 08:57 AM
Hi Sermsak,
It sounds like they, too, may need to be sent in for an Return Merchandise Authorization (RMA). I apologize for this inconvenience.
11-13-2013 10:45 PM
Dear Thomas
Update my solution.
When adjustment, I setting chassis fan to HI. (first time set Auto)
Adjustment was passed.
(sorry for last time that told you for all condition correctly.)
Best Regard
Sermsak K.