From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Home Community Discussion Forums Most Active Hardware Boards PXI Topic

PXI

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Can we use Pxie-6570 generate continuous wave as input and using Pxie-4145 to measure output voltage at the same time?

Solved!
Go to solution

Can we use Pxie-6570 generate continuous wave as input and using Pxie-4145 to measure output voltage at the same time?

‎07-16-2019 01:32 AM

Can we use Pxie-6570 generate continuous wave(digital pattern?) as input and using Pxie-4145 to measure output voltage at the same time? Thanks

 

Noted: Keep the wave always until finished output voltage test.

 

It's very appreciated if you can help to discuss this issue.

0 Kudos
Message 1 of 2
(1,697 Views)
Reply
Solution
Accepted by VA.KI

Re: Can we use Pxie-6570 generate continuous wave as input and using Pxie-4145 to measure output voltage at the same time?

‎08-01-2019 07:53 AM

Hello cai001,

 

As PXIe-4145 is Source Measurement Unit ie. SMU is not designed for signal acquisition. Therefore it is not the proper way of using this device. Basically, SMU is to slow for this task: its sample rate is very low. So I suggest you use scope, digitizer or other DIO device.
I can help you to choose a more proper acquisition device for your tasks. For that could you please give me more detailed information/requirements related to your project.
Thank you.

__________________________________________
The best way to thank, is to give KUDOS
0 Kudos
Message 2 of 2
(1,639 Views)
Reply